It is recommended that you indicate the MPO fiber under test in the Autosave
options (e.g., the Cable ID).
3. In the MPO tab, tap the No. of Fibers drop-down arrow and select the MPO connector fiber
count, 8 or 12. Each fiber strand is represented by a circle. A black inner circle indicates an
active fiber strand and a gray inner circle means inactive.
4. Move the blue arrow above the circles left or right and tap to enable testing for this MPO
group.
OTDR Series e-Manual, RevE00
MPO Setup
MPO Autosave Parameters
Page 105 of 128