VeEX OTDR Series User Manual page 79

2. Configure the V-Scout profile using the information below, then tap OK to accept the
changes selected or Abort to not accept the selections.
• Profile: Auto, Default, Short, Medium, Long (Point-to-Point)
Selecting the Auto profile will use single pulse/wavelength only.
• Wavelengths: OTDR - 1310 or 1550; AUX: - 850 OR 1300
• Test Parameters
• Distance: Select the length and pulse. Select a test range value 25-30% longer than
actual length of test fiber. Select 1-10 pulsewidths that you wish to use to build V-
Scout Link Map. An asterisk will mark any Pulse Width that you have already
selected for use in your new test plan.
• Pulse Width: Select pulse width for test.
• Enable And Use Next Parameters: Check this to enable this profile and use test
parameters set on this screen.
Pulse Widths (PWs) must be selected and enabled for both custom and
default profiles. A profile allows up to 10 PW per wavelength.
• Resolution: Auto, High, or Low, depending on distance range
• Time (m:s): Select the time to use in each test. (The more pulsewidths, the longer
the total test time will be). For record keeping, using short test times is not
recommended test times. Bellcore recommends up to 3 minutes per test.
• Optimized For: DR, DZ, or Automatic DR/DZ
• PON Parameters
• PON Type: Not a PON (Point-to-Point), Manual PON, Auto PON, or Auto PON to
ONT
• 1st Splitter and 2
1x8, 1x16, 1x32, 1x64, 1x128, 2x2, 2x4, 2x8, 2x16, 2x32, 2x64, or 2x128)
For information on defining splitter loss values, see
Thresholds.
3. Use the Modify button to add, rename, or remove the profile.
• To save the settings for a profile, tap Modify and then tap Add to name the new profile.
• To rename the profile, tap Modify and then tap Rename to change the profile name.
• To remove a profile, tap Modify and then tap Remove.
4. In the Profile drop-down list box, select the V-Scout Profile configured previously.
OTDR Series e-Manual, RevE00
nd Splitter (if Manual PON selected) – Not Present, (1x2, 1x4,
Section 7.3.1.2 Splitter
Page 79 of 128