Key Features - Quectel BG96 Series Hardware Design

2.2. Key Features

The following table describes the detailed features of BG96 module.
Table 2: Key Features of BG96 Module
Features
Power Supply
Transmitting Power
LTE Features
GSM Features
Internet Protocol
Features
SMS
BG96_Hardware_Design
Details
Supply voltage: 3.3V~4.3V
Typical supply voltage: 3.8V
Class 3 (23dBm± 2dB) for LTE-FDD bands
Class 3 (23dBm± 2dB) for LTE-TDD bands
Class 4 (33dBm± 2dB) for GSM850
Class 4 (33dBm± 2dB) for GSM900
Class 1 (30dBm± 2dB) for DCS1800
Class 1 (30dBm± 2dB) for PCS1900
Class E2 (27dBm± 3dB) for GSM850 8-PSK
Class E2 (27dBm± 3dB) for GSM900 8-PSK
Class E2 (26dBm± 3dB) for DCS1800 8-PSK
Class E2 (26dBm± 3dB) for PCS1900 8-PSK
Support LTE Cat M1 and LTE Cat NB1
Support 1.4MHz RF bandwidth for LTE Cat M1
Support 200KHz RF bandwidth for LTE Cat NB1
Support SISO in DL direction
Cat M1: Max. 300Kbps (DL)/375Kbps (UL)
Cat NB1: Max. 32Kbps (DL)/70Kbps (UL)
GPRS:
Support GPRS multi-slot class 33 (33 by default)
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Max. 107Kbps (DL), Max. 85.6Kbps (UL)
EDGE:
Support EDGE multi-slot class 33 (33 by default)
Support GMSK and 8-PSK for different MCS (Modulation and Coding
Scheme)
Downlink coding schemes: CS 1-4 and MCS 1-9
Uplink coding schemes: CS 1-4 and MCS 1-9
Max. 296Kbps (DL), Max. 236.8Kbps (UL)
Support PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S) protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol) protocols which are usually used for
PPP connections
Text and PDU mode
LTE Module Series
BG96 Hardware Design
11 / 78