Quectel BG96 Series Hardware Design page 13

(U)SIM Interface
Audio Feature*
USB Interface
UART Interfaces
AT Commands
Network Indication
Antenna Interfaces
Physical Characteristics
Temperature Range
Firmware Upgrade
RoHS
NOTES
1. "*" means under development.
1)
2. Within operation temperature range, the module is 3GPP compliant.
BG96_Hardware_Design
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default
Support USIM/SIM card: 1.8V, 3.0V
Support one digital audio interface: PCM interface
Compliant with USB 2.0 specification (slave only) and the data transfer rate
can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NEMA
output, software debugging and firmware upgrade
Support USB drivers for Windows XP, Windows Vista, Windows 7,
Windows 8/8.1, Windows 10, Windows CE 5.0/6.0/7.0, Linux 2.6/3.x/4.1,
Android 4.x/5.x/6.x/7.x
UART1:
Used for data transmission and AT command communication
115200bps by default
The default frame format is 8N1 (8 data bits, no parity, 1 stop bit)
Support RTS and CTS hardware flow control
UART2:
Used for module debugging and log output
115200bps baud rate
UART3:
Used for outputting GNSS data or NEMA sentences
115200bps baud rate
3GPP TS 27.007 and 3GPP TS 27.005 AT commands, as well as
Quectel enhanced AT commands
One NETLIGHT pin for network connectivity status indication
Including main antenna (ANT_MAIN) and GNSS antenna (ANT_GNSS)
interfaces
Size: (22.5±0.15)mm × (26.5±0.15)mm × (2.3±0.2)mm
Weight: approx. 3.1g
Operation temperature range: -35° C ~ +75° C
Extended temperature range: -40° C ~ +85° C
Storage temperature range: -40° C ~ +90° C
USB interface, DFOTA
All hardware components are fully compliant with EU RoHS directive
LTE Module Series
BG96 Hardware Design
1)
2)
12 / 78