Back Panel; End Panel - Steelcase DOUBLE PEDESTAL DESK Assembly Directions

ATTACH AN END PANEL TO A WORKSURFACE
1.
Fit (2) L-brackets
and attach with .250-14 x 1.00" screws.
NOTE: Z-bracket is to be attached to
worksurface before attaching to back panel.
2.
Attach back panel to end panel.
A Install (3) steel dowels into holes in

back panel.

B Insert (3) cam locks into openings in

end panel.

C Position the panels together and
secure with a half turn of cam locks.
3
3
Z Bracket
10-16
x 3/4"
BACK PANEL
(2) Screws per bracket
.250-14 x 1.00" pan head
Y9501946 Rev. G
in the routed recess of end panel
Worksurface
Top
A
2
END PANEL
CAM LOCK (arrow will
always point toward dowel)
C
B
2
1
Steelcase
L-bracket
3.
Using end panel assembly as
reference, locate the pilot holes
on bottom of worksurface that
matches routed area on end
panel for Z-bracket.
Attach (2) Z-brackets to
bottom of worksurface with
two 10-16- x 3/4" screws each.
Z-bracket
Page 3 of 6