Steelcase DOUBLE PEDESTAL DESK Assembly Directions

Impact - attaching pedestal, end panel and center kneespace panel to worksurface

Download this manual

Steelcase, Inc.

Grand Rapids, MI 49501

U.S.A.

1-888-783-3522

IMPACT - Attaching Pedestal, End Panel

and Center Kneespace Panel to Worksurface

FULL STORAGE CREDENZA

Tools

Assembly Directions

DOUBLE PEDESTAL DESK

(showing slip fit)

1/8"

(3.1 mm)

Printed in the U.S.A.

LH SINGLE PEDESTAL DESK

(shown in this direction)

LH KNEESPACE CREDENZA

w/ CENTER SUPPORT PANEL

Rev. G

Y9501946

Need help?

Do you have a question about the DOUBLE PEDESTAL DESK and is the answer not in the manual?

Page 1 Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 IMPACT - Attaching Pedestal, End Panel and Center Kneespace Panel to Worksurface DOUBLE PEDESTAL DESK (showing slip fit) LH SINGLE PEDESTAL DESK (shown in this direction) FULL STORAGE CREDENZA LH KNEESPACE CREDENZA...
Page 2 8”, 26”, and 32” depending per bracket, 10-12 on pedestal width. x 5/8” pan head 2” (51 mm) minimum Install screws into routs When all brackets are attached proceed to page 6. Steelcase Y9501946 Rev. G Page 2 of 6...
Page 3: Back Panel
Z-bracket. Attach (2) Z-brackets to bottom of worksurface with two 10-16- x 3/4" screws each. BACK PANEL (2) Screws per bracket .250-14 x 1.00” pan head END PANEL Y9501946 Rev. G Page 3 of 6 Steelcase...
Page 4: Top View
If hutch option is being installed, 10-16 x .3/4” drill through pre-drilled pilot holes pan head before installing end panels. (4) Screws .250-14 x 1.00” When assembly is complete proceed to page 6. Y9501946 Rev. G Page 4 of 6 Steelcase...
Page 5 Lower assembly onto worksurface and position so that it is centered in kneespace span and flush with the rear edge of worksurface. Secure with screws provided. When all components are attached proceed to page 6. Y9501946 Rev. G Page 5 of 6 Steelcase...
Page 6 Reinstall drawer(s) and assembly is completed. a rectangular nut. back panels. Metal brackets will fit into openings in rails. (2) bolts per rail .250-20 x 1-1/4” pan head Page 6 of 6 Y9501946 Rev. G Steelcase...

Lh single pedestal deskFull storage credenzaLh kneespace credenza w/ center support panel