8 - 12 SE955 Integration Guide
Power Mode
Parameter # 0x80
This parameter determines the power mode of the engine.
In Low Power mode, the scan engine enters into a low power consumption Sleep power state whenever
possible (provided all WAKEUP commands were released). See
In Continuous Power mode, the scan engine remains in the Awake state after each decode attempt (see
Power Management on page
The Sleep and Awake commands (see
change the power state in either the Low Power mode or the Continuous Power mode.
1-4).
SLEEP on page 10-30
Continuous Power
(0x00)
Low Power
(0x01)
Power Management on page
and
WAKEUP on page
10-33) can be used to
1-4.