Set Lengths For Msi - Motorola SE955 Integration Manual

Set Lengths for MSI

Parameter # L1 = 0x1E, L2 = 0x1F
The length of a code refers to the number of characters (i.e., human readable characters) the code contains,
and includes check digits. Lengths for MSI can be set for any length, one or two discrete lengths, or lengths
within a specific range. See Table B-5 on page B-9 for ASCII equivalents. To set lengths via serial commands,
see Setting Code Lengths Via Serial Commands on page
One Discrete Length - Select this option to decode only those codes containing a selected length. For
example, select MSI Plessey One Discrete Length, then scan 1, 4, to decode only MSI Plessey symbols
containing 14 characters. Numeric bar codes begin on
incorrect entry, scan Cancel on page
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select MSI Plessey Two Discrete Lengths, then scan 0, 6, 1, 4, to decode only MSI Plessey
symbols containing 6 or 14 characters. Numeric bar codes begin on
cancel an incorrect entry, scan
Length Within Range - Select this option to decode codes within a specified range. For example, to decode
MSI symbols containing between 4 and 12 characters, first scan MSI Length Within Range, then scan 0, 4, 1
and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes begin on
8-75. To change the selection or cancel an incorrect entry, scan
Any Length - Scan this option to decode MSI Plessey symbols containing any number of characters.
NOTE Selecting this option may lead to misdecodes for MSI codes.
page
8-76.
MSI - One Discrete Length
Cancel on page 8-76.
MSI - Two Discrete Lengths
MSI - Length Within Range
MSI - Any Length
Parameter Menus 8 - 57
B-6.
8-75. To change the selection or cancel an
page 8-75. To change the selection or
Cancel on page 8-76.
page