Table of Contents
Advertisement
Prefix/Suffix Values
Parameter # P = 0x69, S1 = 0x68, S2 = 0x6A
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set these values,
scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See the
and
Numeric Bar Codes on page
page
8-76. To set the Prefix/Suffix values via serial commands, see
Commands on page
NOTE In order to use Prefix/Suffix values, the
page
8-75. To change the selection or cancel an incorrect entry, scan
B-7.
8-63.
Data Format Cancel
Setting Prefixes and Suffixes Via Serial
Scan Data Transmission Format on page 8-64
Scan Prefix
Scan Suffix 1
Scan Suffix 2
Parameter Menus 8 - 63
Table B-5 on page B-7
Cancel on
must be set. See
Advertisement
Table of Contents
