Table of Contents
Advertisement
1 - 8
SE955 Integration Guide
Beeper Definitions
The SE955 issues different beep sequences and patterns to indicate status.
that occur during both normal scanning and while programming the scan engine.
Beeper Definitions
Table 1-5
Beeper Sequence
Standard Use
Short high beeps
4 long low beeps
5 low beeps
High/high/high/low beeps
Parameter Menu Scanning
Short high beeps
Low/high beeps
High/low beeps
High/low/high/low beeps
Low/high/low/high beeps
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error was detected in a scanned symbol. The data is
ignored. This occurs if a unit is not properly configured. Check option
setting.
Conversion or format error.
RS232 receive error.
Correct entry scanned or correct menu sequence performed.
Input error, incorrect bar code or "Cancel" scanned, wrong entry,
incorrect bar code programming sequence; remain in program mode.
Keyboard parameter selected. Enter value using bar code keypad.
Successful program exit with change in the parameter setting.
Out of host parameter storage space. Scan
page
8-7.
Table 1-5
defines beep sequences
Indication
Set Default Parameter on
Advertisement
Table of Contents
