Display and operating elements
3–2
3.2
Touch screen controller
Software drivers
To change display resolutions, switches 1 through 8 on the externally acces-
sible S1 DIP switch can be set as follows:
D 1024 x 768 pixels
S1
(IPC300)
1 2 3 4 5 6 7 8
All control panels are supplied with a touch screen controller. The touch
screen facilitates manual operation via the touch sensitive display surface,
and replaces the mouse. The calibration of the touch screen takes place with
the help of software on the IPC300.
The touch screen controller functions are communicated via the dedicated
COM2 port on the IPC300.
Operation of the touch screen requires the appropriate software drivers for
the operating system. To install the drivers, proceed as follows:
D from CONTROL PANEL" MOUSE " DISKETTE
and select the touch screen controller on the path:
IPC300:
C:\Rbtool\Elotouch\MMWin95\Setup.exe (Windows 95)
OR:
C:\Rbtool\Elotouch\MMWinNT\Setup.exe (Windows NT)
D or Version 3.10 onwards (only Windows NT) directly using the correspon-
ding SETUP.EXE file:
C:\Rbtool\Elo–DRV\EloNT\Setup.exe
ON
(factory setting
OFF
in IPC300)
1070 073 826-101 (01.10) GB