Table of Contents
Advertisement
Safety Instructions
1–2
1.2
Qualified personnel
The requirements as to qualified personnel depend on the qualification profi-
les described by ZVEI (Zentralverband Elektrotechnik und Elektronikindu-
strie – German Electrical and Electronic Manufacturers' Association) and
the VDMA (Verband deutscher Maschinen- und Anlagenbau – German En-
gineering Federation) in:
Weiterbildung in der Automatisierungstechnik
edited by: ZVEI and VDMA
MaschinenbauVerlag
Postfach 71 08 64
60498 Frankfurt/Germany
The present manual is designed for project engineers and PC specialists.
They need special knowledge on configuration and commissioning of elec-
trical equipment.
Interventions in the hardware and software of our products, unless descri-
bed otherwise in this manual, are reserved to our specialized personnel.
Tampering with the hardware or software, ignoring warning signs attached to
the components, or non-compliance with the warning notes given in this ma-
nual may result in serious bodily injury or material damage.
Only electrotechnicians as recognized under IEV 826-09-01 (modified) who
are familiar with the contents of this manual may install and service the pro-
ducts described.
Such personnel are
D those who, being well trained and experienced in their field and familiar
with the relevant norms, are able to analyze the jobs being carried out
and recognize any hazards which may have arisen.
D those who have acquired the same amount of expert knowledge through
years of experience that would normally be acquired through formal tech-
nical training.
With regard to the foregoing, please note our comprehensive range of trai-
ning courses. Our training center will be pleased to provide you with further
information,
telephone: (+49) (0 60 62) 78-258.
1070 073 826-101 (01.10) GB
Advertisement
Table of Contents
