Installation
4–6
Installation instructions
For the gallows mounting, use the installation opening on the top side of the
L
housing.
Pass the cables leading to the CPS21T and to the distribution circuit board
L
(only CPS21T Version M) through the installation opening in the housing co-
ver.
Fix the swivel/incline adapter of the swivel arm with 4 screws on the installa-
L
tion opening. The connections must be tight (IP 54).
Connect the cables to the corresponding connectors on the CPS21T and the
L
distribution circuit board (Version M).
Close the housing.
L
1070 073 826-101 (01.10) GB