Table of Contents
Advertisement
1070 073 826-101 (01.10) GB
6. Loosen/remove the retaining screws for the display, disconnect the back-
light from the mount, and replace it with a new one.
CAUTION
Use only the same type of displays!
Ensure that the backlight is compatible with the display!
7. Installation is in reverse sequence to disassembly described above.
8. In the event that, subsequent to the installation, the display does not pro-
duce an image, check for the following:
D proper seating and positive contact of display ribbon cable
D proper seating and positive contact of backlight unit
D proper seating of all reconnected connectors.
Maintenance and replacement
7–3
Advertisement
Table of Contents
