Sub-Zero PRO 48 Series Installation Manual page 16

PRO 48 Installation
16
Water Filtration System
WATER FILTER BYPASS MODE
If you choose not to use the water filtration system, the
system can be placed in water filter bypass mode by
WATER FILTER
removing the water filter cartridge. In this mode, the water
supplied to the ice maker will not be filtered and the water
filter monitor will be deactivated.
Lift the top grille assembly to access the water filter
cartridge. To lift the grille, pull out on the bottom edge of
the grille and tilt the grille frame forward. Refer to the
illustration.
Slowly rotate the water filter cartridge one-quarter turn
Lift grille assembly. Water filter removal.
counterclockwise to disengage. Gently twist until the car-
tridge is free from the base. DO NOT pull. There will be
water in the filter cartridge, so it is normal for a small
amount of water to spill out. Refer to the illustration.
The water filtration system automatically goes into bypass
mode when the filter cartridge is removed.