Side View Assist - BMW C 650 GT Rider's Manual

a service station to compensate
7
for the difference between the
RDC reading and the value in the
94
table.
Example: According to the
Rider's Manual, tyre pressure
should be 2.5 bar, but the
reading in the multifunction
display is 2.3 bar, so pressure is
low by 0.2 bar.
The gauge on the air line shows
2.4 bar. You must now increase
tyre pressure by the 0.2 bar dif-
ference between the value in the
table and the RDC reading; when
the air-line gauge shows 2.6 bar,
z
the tyre is inflated to the correct
pressure.

Side View Assist

with Side View Assist
Layout and control
The major components of Side
View Assist are as follows.
4 ultrasonic sensors as
surroundings sensors
Ultrasonic sensor 1 in the front
right fairing side panel
Ultrasonic sensor 2 on the right
in the number plate carrier
Ultrasonic sensor 3 in the front
left fairing side panel
OE
Ultrasonic sensor 4 on the left
in the number plate carrier
The graphic shows the invis-
https://www.motorcycle-manual.com/
ible boundaries of the zones
monitored by the surroundings
sensors.
2 telltale lights
Telltale light in right mirror
housing
Telltale light in left mirror hous-
ing
Control
SVA control unit
Wiring harness connecting all
the components to the SVA
control unit and the instrument
cluster
Function algorithms for ana-
lysing the riding situation de-
pending on the surroundings
sensors and riding speed and
for generating the output sig-
nals that actuate the telltale
lights. The algorithms make
sure that signals from the rear
surroundings sensors are in-
terpreted as plausible riding
situations only in combination