BMW C 650 GT Rider's Manual page 116

8
ATTENTION
Contact of cable of wheel
114
speed sensor with the brake
disc
Sensor cable chafes through
Make sure that the sensor
cable is routed correctly.
Insert the wheel-speed sensor
into the bore and install
screw 1.
Remove the adhesive tape
from the wheel rim.
z
Firmly pull the brake lever until
the pressure point is percept-
ible, and repeat this operation
several times.
Hold the front-wheel cover in
position and install screws 1
and 2 on left and right.
Calibrating ASC (
Removing rear wheel
Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
https://www.motorcycle-manual.com/
CAUTION
Hot exhaust system
Risk of burn injury
60).
Do not touch a hot exhaust
system.
Remove screw 1.