BMW C 650 GT Rider's Manual page 113

Be sure to explain to the spe-
cialist workshop or authorised
BMW Motorrad dealer that the
wheel is fitted with an RDC
sensor.
If the motorcycle is equipped
with RDC, each wheel rim bears
an adhesive label indicating the
position of the RDC sensor.
When a tyre is being changed,
special care must be taken not
to damage the RDC sensor. Be
sure to draw the attention of the
authorised BMW Motorrad dealer
or specialist workshop to the fact
that the wheel is fitted with an
RDC sensor.
https://www.motorcycle-manual.com/
Removing front wheel
Remove screws 1 and 2 on left
and right and work the front-
wheel cover forward to remove.
Remove screw 1 and remove
the wheel-speed sensor from
its bore.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
ATTENTION
Unwanted inward movement
of the brake pads
Component damage on attempt
to install the brake caliper or be-
cause brake pads have to be
forced apart
8
111
z