BMW C 650 GT Rider's Manual page 79

Pre-Ride-Check
The instrument panel runs a test
of the instruments and the telltale
and warning lights when the ig-
nition is switched on: this is the
"Pre-Ride-Check". The test is
aborted if you start the engine
before it completes.
Phase 1
The speedometer needle swings
to the limit value on its scale.
The warning and indicator lights
are switched on.
Phase 2
The speedometer needle swings
back to its original position. The
telltale and warning lights go out.
If the needle did not move or if a
warning light or telltale light did
not show:
WARNING
Faulty warning lights
https://www.motorcycle-manual.com/
No indication of malfunctions
Check all the telltale and warn-
ing lights.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
BMW Motorrad ABS performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition. The Maxi-
Scooter has to move forward a
few metres for the wheel-speed
sensors to be tested.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
ABS warning light flashes.
Phase 2
Test of the wheel-speed
sensors as the vehicle pulls
away from rest.
ABS warning light flashes.
ABS self-diagnosis
completed
The ABS warning light goes
out.
If an indicator showing an ABS
fault appears when ABS self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the ABS function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
6
77
z