BMW C 650 GT Rider's Manual page 118

Installing the rear wheel
8
WARNING
116
Use of a non-standard wheel
Malfunctions in control attempts
made by the ABS and ASC
See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.
ATTENTION
z
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Roll the rear wheel into position
at the rear-wheel adapter and
attach it.
Install five screws 8 and tighten
to the specified torque in diag-
onally opposite sequence.
Tightening sequence: tighten
in diagonally opposite se-
quence
60 Nm
https://www.motorcycle-manual.com/
Rear wheel on output
shaft
Apply high-temperature grease
round the inside of the silencer
pipe.
Seat rear silencer 7 on the
front silencer and hold it in po-
sition.