BMW C 650 GT Rider's Manual page 114

Do not operate the brakes with
8
a brake caliper not correctly
secured.
112
Remove screws 2 of the brake
callipers on left and right.
z
Force the brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc 5.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
Lift the front of the Maxi-
Scooter until the front wheel is
clear of the ground, preferably
using a BMW Motorrad front-
wheel stand.
Installing the front-wheel stand
( 98).
Slacken right clamping
screws 1.
Remove quick-release axle 2,
while supporting the wheel.
Roll the front wheel forward to
https://www.motorcycle-manual.com/
remove.
Installing front wheel
WARNING
Use of a non-standard wheel
Malfunctions in control attempts
made by the ABS and ASC
See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.