BMW C 650 GT Rider's Manual page 101

Install spacer buffers 1 in the
bottom positions on left and
right.
Slacken securing screws 2 on
left and right.
https://www.motorcycle-manual.com/
Push adapters 3 on left and
right apart until the front forks
fit between them.
Use locating pins 4 on left and
right to set the front-wheel
stand to the desired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align adapters 3 on left and
right so that the front forks are
securely seated.
Tighten securing screws 2 on
left and right.
ATTENTION
Centre stand retracts if the
vehicle lifted too high
Risk of damage to parts if vehicle
topples
When raising the vehicle, make
sure that the centre stand re-
mains on the ground.
If necessary, adjust the height
of the front-wheel stand.
Apply uniform pressure to push
the front-wheel stand down
and raise the Maxi-Scooter.
Make sure the Maxi-Scooter is
standing firmly.
8
99
z