BMW C 650 GT Rider's Manual page 39

on temperature compensation
and pressure adaptation in the
section entitled "Engineering
details":
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
If you are unsure whether the
vehicle can be ridden with the
tyres in the present condition:
Do not continue your journey.
Notify the breakdown service.
Signal transmission
disrupted
with tyre pressure control
OE
(RDC)
"--" or "--:--" is displayed.
Possible cause:
The vehicle has not yet accel-
erated past the threshold of ap-
proximately 30 km/h. The RDC
https://www.motorcycle-manual.com/
sensors do not start transmitting
signals until the vehicle reaches
a speed above this threshold for
the first time ( 93).
Increase speed above this
threshold and observe the RDC
readings. Assume that a per-
manent fault has not occurred
unless the 'General' warning
light comes on to accompany
the symptoms. Under these
circumstances:
Have the fault rectified by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Possible cause:
Wireless communication with the
RDC sensors has been disrupted.
Possible causes include radio-
communication systems operat-
ing in the vicinity and interfering
with the link between the RDC
control unit and the sensors.
Move to another location and
observe the RDC readings. As-
sume that a permanent fault
has not occurred unless the
'General' warning light comes
on to accompany the symp-
toms. Under these circum-
stances:
Have the fault rectified by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
RDC sensor defective or
system error
with tyre pressure control
OE
(RDC)
General warning light shows
yellow.
Tyre symbol appears on
the display.
"--" or "--:--" is displayed.
3
37
z