Customize The View; Customize The 360 View On Solix Series - Humminbird MEGA 360 IMAGING Operation Manual

Customize the View

Customize the 360 View on SOLIX Series

The X-Press Menu provides menu options to adjust the sensitivity, contrast, sharpness, and water column sensitivity as you fish.
1. With a 360 View displayed on-screen, tap Sonar (360) in the status bar, or press the MENU key once.
2. Select Sensitivity, Contrast, or Sharpness.
3. Press and hold the slider, or turn the Rotary dial, to adjust the setting.
Sensitivity
Contrast
Sharpness
Water Column
Sensitivity
NOTE: The Sensitivity and Contrast are set high in the above illustration. The high Sensitivity setting displays more weak returns on
the display, and the high Contrast setting shows more definition between the light and dark returns.
Sensitivity controls how much detail is shown on the display and will adjust the sensitivity
of all sonar frequencies. Decrease the sensitivity to eliminate the clutter from the display
that is sometimes present in murky or muddy water. When operating in very clear water
or greater depths, increase the sensitivity to see weaker returns that may be of interest.
Adjust the Contrast setting to accent the light and dark parts of the MEGA 360 Imaging
data to provide greater definition.
When MEGA 360 Dynamic Contrast is turned on, the contrast will be automatically
adjusted.
Turn on Sharpness and select a filter level to sharpen the edges of the MEGA 360 Imaging
data.
Increase or decrease the sensitivity of the sonar return that is in the water column.
Decrease the sensitivity to reduce clutter and increase the sensitivity to see more sonar
information.
MEGA 360 Sensitivity and Contrast Settings (SOLIX)
35 Customize the View