Check The Current Software Version - Humminbird MEGA 360 IMAGING Operation Manual

4. Under Export, select Nav Data.
5. Follow the on-screen prompts.
6. Select a Save Location: Save to the SD Card.
7. Repeat steps 4 and 5 to export Menu Settings and Radar Installation settings (if applicable to your installation).
8. Networked Units: Repeat the steps in this section on each control head.
Copy Internal Images
If you have screen snapshots saved to the control head, use the following instructions to copy them to an SD or microSD card.
1. Confirm the SD or microSD card is installed in the control head card slot.
2. Press the HOME key.
3. Select the Images tool. Tap the icon, or press the ENTER key, to open.
4. Under Source, select Internal.
5. Press and hold one of the screen snapshots.
OR
Use the Joystick to select a screen snapshot. Press the MENU key.
6. Select Copy All.
7. Select a Save Location: Save to the SD Card (left slot = SD Card 1, right slot = SD Card 2)
8. Repeat the steps in this section on each control head.
HELIX Series
Export Navigation Data
1. Install the SD card or microSD card according to the instructions in your control head operations manual.
2. Power on the control head.
3. Main Menu: Press the MENU key twice. Select the Nav tab.
4. Select Waypoints, Routes, Tracks. Press the RIGHT Cursor key.
5. Select Options > Select All and ... > Export.
6. Follow the on-screen prompts to confirm or cancel the export.

Check the Current Software Version

It is helpful to review the software version number that is currently installed on the control head and each accessory.
SOLIX Series
1. Press the HOME key.
2. Select Settings > Network > Network Info.
3. The Network Info dialog box shows a section for each
device connected to the network. Scroll to each section
to note the software version number listed.
Update Software
HELIX Series
1. Press and hold the VIEW key.
2. Select System > System Status.
3. Confirm the Software Version listed.
14