Helix Series Networking - Humminbird MEGA 360 IMAGING Operation Manual

HELIX Series Networking

Open the Network Source Setup Dialog Box
1. Main Menu: Press the MENU key twice.
NOTE: If a System View is displayed on the screen, you will only need to press the MENU key once to open the Main Menu.
2. Select the Network tab.
3. Select Network Source Setup. Press the RIGHT Cursor key.
Status Tab: Review the status tab to see all detected sources in the network. If a source is grayed out, the source is detected,
but the connection is lost or unavailable.
Select a Source: Review each source section to select a data source for each control head.
Set Up the Network
selected source
Opening the Network Source Setup Dialog Box (HELIX)
18
turn on/off transducer
pinging setup menu
If you change settings here, it will
change the settings across the network.
turn on/off
transducer