Change The Sweep Speed And Range; Change The Sweep Speed; Change The 360 Range - Humminbird MEGA 360 IMAGING Operation Manual

Change the Sweep Speed and Range

The 360 Imaging menu options allow you to change the sweep speed and range. The settings you use will influence how quickly the
screen refreshes and how much detail is shown on the screen.

Change the Sweep Speed

The 360 Speed menu option allows you to adjust the speed of the sweep from six beam rotation speeds for the right balance of
image quality and refresh rate. When the sweep speed is slower, more detail is shown on the screen. When the sweep is faster, more
information is displayed but less detail is shown.
SOLIX Series
1. X-Press Menu: With a 360 View displayed on the screen,
press the MENU key once, or tap Sonar (360) on the
status bar.
2. Select 360 Speed.
3. Press and hold the slider, or press and hold the ENTER
key, to set the 360 speed.
Changing the Sweep Speed (SOLIX)

Change the 360 Range

360 Range controls how far the MEGA 360 Imaging beams will ping. Select a low range number to focus on a shorter distance of the
water column and see greater detail on the screen. Select a higher range number to see farther into the water and see an overview
of details on the screen. For optimal performance, select 80 feet.
NOTE: If the MEGA 360 Imaging transducer is providing data for the Side Imaging Views, the 360 Range setting will control the SI
Range setting.
SOLIX Series
1. X-Press Menu: With a 360 View displayed on the screen,
press the MENU key once, or tap Sonar (360) on the
status bar.
2. Select 360 Range.
3. Press and hold the slider, or press and hold the ENTER
key, to set the 360 range.
QUICK TIP! This setting can also be changed by turning
the Rotary Dial.
Sweep Speed and Range
HELIX Series
1. X-Press Menu: With the 360 View or Combo View
displayed on the screen, press the MENU key once.
2. Select 360 Speed.
3. Press the RIGHT or LEFT Cursor keys to select a sweep
speed.
Changing the Sweep Speed (HELIX)
HELIX Series
1. X-Press Menu: With the 360 View or Combo View
displayed on the screen, press the MENU key once.
2. Select 360 Range.
3. Press the RIGHT or LEFT Cursor keys to adjust the range.
38