Mark And Display Waypoints; Turn On/Off Navigation In The Mega 360 Views; (Helix Only); Mark A Waypoint - Humminbird MEGA 360 IMAGING Operation Manual

Mark and Display Waypoints

You can mark a waypoint directly on your Humminbird screen, and let the range rings show you the distance from your boat to the
target. To mark waypoints and start navigation, the control head must have a GPS fix and a heading sensor (compass).
You can use the following navigation functions in a 360 View:
Δ Display Waypoints as they are marked on the view. Waypoints can be marked at the boat position or cursor position.
Δ In a 360/Chart Combo View, you can see where your boat is positioned in relation to a waypoint on the Chart View and in
relation to underwater structure in the 360 View (see MEGA 360 Imaging Views for more information).
Turn On/Off Navigation in the MEGA 360 Views (HELIX only)
Turn on the Navigation on 360 menu option to mark and display waypoints on the 360 View. To hide waypoints on the 360 View,
select off. If Navigation on 360 is turned off, you can mark waypoints, but they won't be displayed on the 360 View.
NOTE: The GPS Receiver/Heading Sensor must be connected to the control head to enable
these features on the 360 View.
1. Main Menu: Press the MENU key twice.
2. Select the Accessories tab > 360 Sonar Settings > Navigation on 360.
3. Press the RIGHT or LEFT Cursor keys to select On or Off.
Turn on Navigation on 360 in the 360/Chart Combo View, and you can see where your
boat is positioned in relation to underwater structure.

Mark a Waypoint

You can mark a waypoint at the boat position or the cursor position.
Mark a Waypoint at the Boat Position
SOLIX Series
1. Tap Sonar (360) in the status bar.
2. Select Mark.
3. Select Waypoint.
OR
1. Press the Mark key twice.
Mark a Waypoint at the Cursor Position
SOLIX Series
1. Press and hold a position on the 360 View.
2. Select Waypoint.
OR
1. Use the Joystick to move the cursor to a position on the
360 View.
2. Press the MARK key twice.
HELIX Series
1. Press the MARK key.
HELIX Series
1. Use the Cursor Control key to move the cursor to a
position on the 360 View.
2. Press the MARK key twice.
43 Mark and Display Waypoints