Side Imaging View - Humminbird MEGA 360 IMAGING Operation Manual

Side Imaging View

If a MEGA 360 Imaging transducer or a Side Imaging transducer is connected to the control head, the Side Imaging View will be
available in the database of available views. It is also important to understand the following:
SI Source
Start Side Imaging
SI Range and 360
Range
More Information
NOTE: The MEGA 360 Imaging transducer provides data for the 360 View OR the Side Imaging View. These views cannot be displayed
at the same time if they are sharing the MEGA 360 Imaging transducer in a multiple-control head Ethernet network.
Side Imaging Mode On-screen Alert (HELIX)
MEGA 360 Imaging Views
You may have different SI view options, depending on your setup and network.
MEGA 360 Imaging transducer: The MEGA 360 Imaging transducer will automatically
be configured as the Side Imaging sonar source. You can switch between 360 and Side
Imaging views. An on-screen alert will display before switching between MEGA 360 mode
and Side Imaging mode.
MEGA 360 Imaging and Side Imaging transducers: If there is a MEGA 360 Imaging
transducer and a Side Imaging transducer connected to the control head with a splitter
cable (y-cable), the Side Imaging transducer will only display high wide and MEGA Down
Imaging data. However, you can use the MEGA 360 Imaging transducer to provide the
Side Imaging beam data for the Side Imaging Views (see Set Up MEGA 360 on the
Network). You can switch between 360 and Side Imaging views. An on-screen alert will
display before switching between MEGA 360 mode and Side Imaging mode.
SOLIX: Tap the View widget icon in the side bar and select a Side Imaging view. If you are
switching from MEGA 360 mode to Side Imaging mode, an on-screen alert will display.
Tap the right arrow to begin Side Imaging operation.
HELIX: Press and hold the VIEW key. Select Sonar > Side Imaging. If you are switching
from MEGA 360 mode to Side Imaging mode, an on-screen alert will display. Press the
RIGHT Cursor key to start Side Imaging operation.
If the MEGA 360 Imaging transducer is providing data for the Side Imaging Views, the
360 Range setting and the SI Range setting will be shared. When you change the 360
Range setting, the SI Range setting will also be changed, and vice versa.
See your control head operations manual and Operations Summary Guide for more
information about Side Imaging. These manuals were included with your control head, or
they can be downloaded from our Web site at humminbird.com.
Side Imaging from MEGA 360 Transducer (HELIX)
MEGA 360 transducer indicator
30