Keysight Technologies X Series Security Features And Document Of Volatility page 34

Memory Sanitization and Removal Procedures
Archiving and Restoring Factory Calibration Data Files
Figure 5-5 Alignment Data Wizard Storage Options for PC6S/PC7S
Security Features & Document of Volatility
The available storage location options are as follows:
— Internal Flash is the Calibration Backup memory in the A4 Processor
assembly. For PC6S/PC7S, this is the default location. See item 17
of Table 4-1.
— External Removable Drive. This is the SD memory card in the A4
Processor assembly. See item 7 of
If the instrument has a PC6 or PC7 Processor Assembly, then the dialog contains only
the External Removable Drive selection, as shown in
default storage location is the SD memory card in the A4 Processor assembly.
Table 4-1.
Figure 5-6. In this case, the
34