Keysight Technologies X Series Security Features And Document Of Volatility page 40

Disk Drive Removal Procedure
1. Locate the Processor and Disk Drive Assembly on the instrument's rear panel, as
2. Locate the removable drive, and its retaining thumbscrew, as shown in
Figure 6-1 Instrument Rear Panel & Processor Assembly
3. Turn the thumbscrew to release the drive from the panel, as shown in
Security Features & Document of Volatility
shown in Figure 6-1.
thumbscrew is too tight to turn by hand, use a TORX T10 screwdriver to loosen it.
Figure 6-1.
Figure 6-2. If the
40