Modifying An Existing Video Modeline; Modification To Support The Alternate Timing - Thinklogical Velocityrgb Video Extension System-9 Product Manual

Using the right or left arrow, scroll until the blinking cursor is under the letter/number you want to change.
Using the up or down arrow, scroll (holding down the up or down arrow will scroll faster) until you find the
appropriate letter/number. Then press enter.
Using the right or left arrow, scroll to return to the *System menu option.
Follow the steps in Section 2.7.2 Saving Changes
1. Using the down arrow, scroll down to *System as shown below.
2. Using the right arrow, scroll right until Store Values is displayed as shown below. Then
press enter.
3. Using the up or down arrow scroll until Yes appears as shown below. Then press enter.
4. Using the right or left arrow, scroll to return to the *System menu option.
5. Using up or down arrow scroll until you get to the Thinklogical screen.

4.2.5 Modifying an Existing Video Modeline

Modification to support the alternate timing.

Revision D
Tx Ctrl
Name=
Tx Ctrl
Name=
*System
TXUnit01
TXUnit11
to save your changes. The steps are listed below:
18 December 2012