Thinklogical Velocityrgb Video Extension System-9 Product Manual page 18

Table of Contents

Advertisement

Some menu options may not be available on some models
Display
Modifiable
*System
LS Connected
TX Ctrl Name
Load Defaults
Store Values
TX Control
RX Control
FPGA Version
Serial Number
Aud Reset En
SFP Loss of Signal
channel. Value =
Debug Values
___________________________________________________________________________________________
______________
*DDC – To be implemented at a later date
DDC PROM Emula. Mode
Load Default DDC
mode to
Acquire DDC
stores it
Force DDC mode
digital.
* Video
VGA Connected
Resolution input
Hor. Freq
Auto Phase
PLL Total
pixels +
HSOUT Width
DE Start
DE Width
Line Start
measured
Revision D
Description
NO
An indication of the fiber status from the TX to RX.
TX Only
Name entered on TX unit is displayed on RX unit.
YES
Loads factory default video configurations.
YES
Store video configurations.
NO
Revision of the TX control firmware.
NO
Revision of the RX control firmware.
NO
Revision of the FPGA code
YES
Serial Number of unit.
YES
Resets the audio sync circuitry
NO
An indication of fiber status on the extender Receive
0 if signal is received, 1 if signal is missing.
YES
Factory Use Only.
YES
Options are Dynamic, Static and Passthru.
In Dynamic mode, the DDC of the monitor connected to the RX is
read and stored on the TX. The CPU is informed of a change in
DDC and the monitor is read. This is useful when the CPU can be
turned on without a connection to the RX. Static mode is used to
maintain the current DDC regardless of monitor changes at the
RX. Pass-thru acts as a wire between the TX and RX and no
emulation takes place.
YES
Loads the default EDID table into the TX and changes the
Static.
YES
Gets the EDID table from the monitor attached to the RX and
in the TX.
YES
Sets the EDID Video Input Signal Type to either analog or
No
An indication of whether VGA video is input to the Vis TX
No
Active pixels x active lines vertical rate
No
Horizontal frequency
Yes
Automatically adjust the Sampling Phase to the best setting
Yes
The total pixel count in one line. Consists of Horizontal active
Horizontal blanking pixels
Yes
Horizontal sync (Hsync) of video, measured in pixels
Yes
Yes
Total active pixels in one line
Yes
Vertical back porch (Vbp) + Vertical sync (Vsync) of video,
in lines
13
Horizontal back porch (Hpb) of video, measured in pixels
December 2012

Advertisement

Table of Contents
loading

Table of Contents