Table of Contents
Advertisement
VelocityKVM Transmitters and Receivers with the FireWire Option
NOTE: The FireWire option requires 2 additional Fiber Optic Cables.
FireWire (Fibers & IN Port)
FireWire Indicator LEDs
PWR:
FireWire PCB power On/Off
CP:
ON=Cable Powered
CLINK:
ON=CPU connected (linked)
FOL:
(Fiber Optic Link) ON=connection, BLINKING=no connection
Unmarked LEDs are non-functioning
FireWire (Fibers & OUT Port)
FireWire Indicator LEDs
PWR:
FireWire PCB power On/Off
CP:
ON=Cable Powered
CLINK:
ON=CPU connected (linked)
FOL:
(Fiber Optic Link) ON=connection, BLINKING=no connection
Unmarked LEDs are non-functioning
Fiber and Video Ports
The following transmitter and receiver rear panel diagrams explain the functions of the fiber optic cable
input and output ports and the video input and output ports for each of the VelocityKVM Extenders. For
the fiber connections,
purple,
Optical Fiber L2, which carries DATA from Rx to Tx, is in blue
are in red.
Refer to the Quick Start Guides in Appendix B (pg. 45-52) for more information.
Velocity-4 KVM Multi-Mode Extender
Single-Head, Singlel-Link DVI
Transmitter
VEL-W00M04-LCTX
Receiver
VEL-W00M04-LCRX
V e l o c i t y K V M E x t e n d e r P r o d u c t M a n u a l , R e v .
Audio IN (source)
RS-232
Stereo Emitter IN (3D)
Audio OUT
(from microphone)
Audio OUT (speakers)
RS-232
Optical Fiber L1, which carries both DATA from Tx to Rx and VIDEO, is in
L1 Fiber: Data Tx to Rx & Video
L2 Fiber: Data Rx to Tx
DVI OUT (local)
DVI IN (from source)
L2 Fiber: Data Rx to Tx
L1 Fiber: Data Tx to Rx & Video
DVI OUT (secondary)
DVI OUT (DDC)
:
Peripheral and Update Ports, LED Indicators
Local Keyboard/Mouse (HID or PS2)
PS2 Keyboard/Mouse (source)
USB HID & USB 2.0 IN
USB HID, PS2 and USB 2.0
Audio IN (microphone)
Stereo Emitter OUT (3D)
and
C , F e b r u a r y , 2 0 1 7
Transmitter
VEL-F00M04-LCTX
Update Ports
Receiver
VEL-F00M04-LCRX
all VIDEO ONLY fibers
Page 20
Advertisement
Table of Contents
