Table of Contents
Advertisement
Removing
the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the support
Condemser coils
-----
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
'I
Defrost pan
grille
- Support tabs
See cleaning instructions for defrost pan and
condenser coils on page 17.
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to it at the main power supply.
Failure to do so could result in personal
injury.
To change
refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to remove
bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change freezer light:
1. Disconnect refrigerator from power supply.
2. Grasp front of light shield.
3. Pull bottom of light shield forward until it snaps
free.
4. Replace with a 40-watt appliance bulb.
5. Press light shield straight on until it snaps into
place.
6. Reconnect refrigerator to power supply.
NOTE: Not all commercial
appliance bulbs will fit
your refrigerator.
Be sure to replace bulb with one
of the same size and shape.
14
Advertisement
Table of Contents
