Whirlpool TS22BR Use And Care Manual page 8

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call us.
(See page 22.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
I
RECOMMENDED
CONDITION: REASON:
CONTROL SElTINGS:
I
If Refrigerator
Door opened often
Section is
Large amount of food added
TOO WARM
Room temperature too warm
Refrigerator
Freezer i
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Refrigerator 3
Freezer C
If Refrigerator
Section is
TOO COLD
Controls not set correctly
for your conditions
Refrigerator 2
Freezer B
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Refrigerator 3
Freezer
C
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 4
Freezer
B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
3. Lower front of shelf to level position.
8