Adjusting The Crisper Humidity; Controls; Moving The Meat Drawer And Cover; Adjusting The Shelf Glides - Whirlpool ETl8DK Use & Care Manual

Adjusting the crisper humidity con
You can control the amount of humidity in the
moisture-sealed crisper.
1.
The control can be adjusted to any setting
between LOW and HIGH.
2. LOW [open] lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HIGH (closed) keeps moist air in the crisper for
best storage of fresh leafy vegetables.
m
Moving the meat drawer
and coierr..
GLASS IS HEAVY. I$-
BE CAREFUL.
PULL OUT TO THE STOP, LIFT THE -
Ii7
out.
FRONT AND PULL AGAIN.
2. Replace in reverse order.
__ __
To remove the meat drawer:
1.
Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1.
Tilt front of cover up, lift at back, and pull straight
Adjusting the shelf glides...
The shelf glides can be used to secure odd
shaped items or to separate other items.
1.
Grasp glide.
2. Slide glide along guide.
SLIDE ALONG
GUIDE
Shelf glide cannot be removed.
Changing the light bulbs...
1.
Reach behind the control console to find bulbs.
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
Removing the base grille...
To remove the grille:
SUPPORT TABS
1.
Open the door.
2. Pull grille outwards as shown.
3.
Do not remove Tech Sheet
fastened behind
grille.
To replace the grille:
1.
Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3.
Close the door.