Removing The Freezer Shelves; Removing The Freezer Bin; Removing The Base Grille - Whirlpool ED20F134RN0 Owner's Manual

Using Your Refrigerator
Continued
Lifl the right side,
then slide out.
Pull out to the stop,
lift the front and
pull again.
Condenser coils
Removing the freezer shelves
To remove a shelf:
1. Lift right side of shelf off supports.
2. Slide left side of shelf out of support holes.
3. Replace in reverse order.
To adjust a shelf (on some models):
1. Remove shelf.
2. Remove supports by sliding upward.
3. Replace supports on desired level.
4. Replace shelf.
NOTE: The cup-shaped supports go in the back
of the freezer cabinet.
Removing the freezer bin (or basket)
To remove the bin (or basket):
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin (or basket):
1. Place on the slides of cabinet.
2. Make sure the stops clear the front of the
slides.
3. Slide in all the way.
Removing the base grille
To remove the grille:
1. Open the doors.
2. Pull base grill forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 13.