Removing The Crisper, Meat Pan And Covers; Changing The Light Bulbs; Removing The Base Grille - Whirlpool ED22MM Use & Care Manual

Removing the crisper, meat pan and covers...
To remove fhe crisper and meaf pan:
1 Slide crisper and meat pan straight out to stop
2 Lift the front
3
Slide the rest of the way out
4 Replace In reverse order
Push the Tab
to Clear the Cover.
To remove fhe covers:
l
Covers are held in place by two pegs at the bat
and two notched tabs in front
1 Press front tabs out of the way
2 Lift cover front
3
Lift bock off the pegs
4 Replace in reverse order
Snap Back Into Place.
Changing the light bulbs...
WARNING: Before removing a light shield for
cleaning or for replacing the bulb,
either unplug refrigerator or discon-
nect electricity leading to re-
frigerator at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
\
Light bulbs behind refrigerator and freezer con-
trol consoles:
1 Pull control knob straight off
2 Pull bottom of control panel straight out
3
Loft top of panel off supports
4 Replace with a no-watt appliance bulb
5 Replace panel In reverse order
Light bulb behind ice maker:
1 Remove the Ice bin [see ice maker Instruction:
2 Replace with a no-watt appliance bulb
3 Replace Ice bin
Light bulb above crisper:
1 Pull top of the light shield awuy from the back wall
2 Lifi shield off base supports
3 Replace with a 40-w&i appliance bulb
4 Replace shield In reverse order
Dispenser light:
1 Reach the bulb through the dispenser area
2 Replace with a heavy-duty IO-watt bulb.
I
Pull Ott the Dial;
Pull Out at the Bottom
Removing
the base grille..
1. Open the doors.
1. Line up grille support tabs with metal clips
2. Pull grille outwards as shown 2. Push firmly to snap into place
3
Do not remove Tech sheet
fastened behind grille 3
Close the doors.