Removing The Freezer Shelves; Removing The Freezer Basket; Ice Cube Trays; Changing The Light Bulbs - Whirlpool ED26MK Use & Care Manual

Removing the freezer sl+ves...
Lift the Front
Then the Back
Removing the freezer basket.. .
For proper air movement, keep the freezer basket
In place when the refrrgerator is operatrng.
To remove the basket:
1 Slide out to the stops.
2 Loft the front to clear the stops.
3. Slide out the rest of the way
To replace the basket:
1 Place baskets on the slides.
2 Make sure the wire stops clear the front of the sltdes
3. Slide basket tn
Ice cube trays.. .
To remove ice:
1. Hold tray at both ends.
2. Slightly twist
Changing the light bulbs. . .
WARNING: Before removing the light shield for
cleaning or for replacing the bulb,
either unplug refrigerator or discon-
nect electricity leading to re-
frigerator at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
Pull Off the Dial:
Pull Out at the Bottom
Removing the base grille.. .
1 Open the doors
I. Lift front slightly.
2. Lift back off supports
3. Replace In reverse order
If cubes are not used, they may shrink The moving
cold arr starts a slow evaporatron The longer cubes
are stored. the smaller they get
light blubs behind refrigerator and freezer
control consoles:
1 Pull control knob straight off
2 Pull bottom of control panel straight out
3. Lift top of panel off supports.
4. Replace with a 40.watt appliance bulb.
5. Replace panel in reverse order.
light bulb behind crisper and meat pan:
1 Remove crisper, meat pan and covers.
2. Bulb IS on the back wall of refrigerator
3 Replace with a 40-watt appliance bulb.
4. Replace covers, meat pan and crisper
2 Pull grille outwards as shown
3. Do not remove Tech sheet fastened behrnd grille
Support Tabs
To replace:
1 Lrne up grille support tabs with metal clips
2 Push firmly to snap Into place
3 Close the doors.