Cisco IE 5000 Product Documentation And Compliance Information page 9

Slide the ground screw from Step 1 through the terminal lug. Insert the ground screws into the opening
Step 4
on the cable side.
Figure 1-3
Dual-hole terminal lug
1
Use a ratcheting torque screwdriver to tighten the ground screws to 30 in-lb (± 2 in-lb) or 3.39 Nm (± 0.23 Nm).
Step 5
Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus or a
Step 6
grounded bare rack.
78-100604-01
Attaching the Terminal Lug
C is co IE
30 10
Product Documentation and Compliance for the Cisco IE 5000 Switches—
Documentation produit et conformité pour les commutateurs Cisco IE 5000
9