Objects In The Extended Mib For Hf-W; Table 4-11 Objects Related To The Hardware Status - Hitachi HF-W7500 40 Manual

4.5.4 Objects in the extended MIB for HF-W

In order to acquire the hardware status of this equipment from a remote device, use the
extended MIB for HF-W. This subsection provides a list of objects defined in the
extended MIB for HF-W and a description of those objects.
(1) Objects related to the hardware conditions and settings
Table 4-11 shows a list of the objects related to the hardware status and a description
of those objects. The object ID of each object is obtained by either replacing the
following "x" with the object in the following table or replacing the following "y"
with the object number in the table.
Object ID: .iso.org.dod.internet.private.enterprises.Hitachi.systemExMib.
No. Object
1 hfwFan
2 hfwFan.fanNumber
3 hfwFan.fanTable.fanEntry.fanIndex
4 hfwFan.fanTable.fanEntry.fanName
5 hfwFan.fanTable.fanEntry.fanStatus
6 hfwTemp
7 hfwTemp.tempNumber
8 hfwTemp.tempTable.TempEntry.tempIndex
9 hfwTemp.tempTable.TempEntry.tempName
10 hfwTemp.tempTable.TempEntry.tempStatus
11 hfwHdd
12 hfwHdd.hddNumber
13 hfwHdd.hddTable.hddEntry.hddIndex
hfwExMib.hfwRasStatus.x (x is an object in the table below)
or
.1.3.6.1.4.1.116.5.45.1.y (y is an object number in the table below)

Table 4-11 Objects Related to the Hardware Status

number
1
1.1
1.2.1.1
1.2.1.2
1.2.1.3
2
2.1
2.2.1.1
2.2.1.2
2.2.1.3
3
3.1
3.2.1.1
4. CHECKING THE HARDWARE STATUS
Object
Description
Fan condition group
The number of monitored
fans
Index number of fanEntry
Fan name
Fan condition
Temperature condition
group
Number of monitored
temperatures
Index number of tempEntry
Name of the temperature to
bemonitored
Temperature condition
Drive condition
group
Number of monitored drive
bays
Index number of hddEntry
4-29
Description of the values
-
-
-
PS fan: Power fan
Front fan: Front fan
CPU fan: CPU fan
1: Normal
2: Error
-
-
-
Internal temperature:
Temperature inside the chassis
1: Normal
2: Error
-
-
-
(1/2)