Editing Popup Notification Messages; Figure 3-10 Format Of A Definition File - Hitachi HF-W7500 40 Manual

3. SETTING UP THE RAS FEATURE

3.1.4 Editing popup notification messages

(1) Editing popup notification messages
If you want to edit messages used for popup notification, click Edit. Notepad is
launched and the message definition file for popup notification is opened. Edit the
messages in the format described below.
NOTE
While you are editing messages, you cannot do the following:
• Clicking Edit.
• Clicking Set default.
• Closing the RAS Setup window (clicking OK or Cancel).
If you do one of the above, the following cautionary message is displayed.
If you click OK when you receive the message, you go back to the RAS Setup
window.
■ Format of a definition file
The format of a definition file is as follows.
;-- Example of the definition of messages --
[PS-FAN]
Line1=""
Line2=""
Line3="Revolution of fan at power supply deteriorated"
Line4="remarkably"
[CPU-FAN]
Line1=""
Line2=""
Line3="Revolution of cpu fan deteriorated remarkably."
A definition file consists of sections, keys, and the values of the keys.
Each section contains keys and their values. A key and its value are separated by an equal
sign (=).
Lines that start with a semicolon (;) are comment lines.
Section
Key

Figure 3-10 Format of a Definition File

3-14
Value