4. CHECKING THE HARDWARE STATUS
4.5.2 Hardware conditions that can be acquired by using remote notification
The following hardware conditions and settings can be acquired from a remote device:
Fan condition
•
Temperature condition inside the chassis
•
Drive condition
•
Memory condition
•
RAID status (D Model only)
•
RAS function settings
•
Operational mode (normal mode)
•
Version information of the extended Management Information Base (MIB) for HF-W.
•
The following transitions of the hardware conditions are notified by using a trap.
(1) Fan condition
• Normal → Error
• Error → Normal
(2) Temperature condition inside the chassis
• Normal → Error
• Error → Normal
(3) Drive condition
• Normal → Failure anticipated
• Normal → Used hours exceeded the threshold
(4) Memory condition
• Normal → Frequent error correction
• Frequent error correction → Normal
(5) RAID status (D Model only)
• Optimal → Error (Degrade, Unknown, or Fail)
• Error (Degrade, Unknown, or Fail) → Optimal
(6) Operational mode
• HF-W stopped → Started in normal mode
• Running in normal mode → Running in simulation mode
4-22