Table 4-1 Hardware Status Icon - Hitachi HF-W7500 40 Manual

4. CHECKING THE HARDWARE STATUS
● In the case of Windows Server® 2012 R2
1. Click OK in the message above.
2. Click Start to launch the Start screen.
3. Click
4. Click RAS Status under the RAS Software group in the Apps view.
(1) List of displayed icons and description of each icon
Table 4-1 shows a list of displayed icons and a description of each icon. A description
of the displayed icon is shown when you point the mouse cursor to the icon.
Hardware
No.
status
1
Normal
2
3
4
5
6
7
8 Error
9
10
11
12
13
14
15
Caution
16
Nos. 5 through 7 and 15: When both "Time of drive exceed." and "Drive failure possible." happen at the
Nos. 11 through 14: These descriptions apply to D Model only. When both "Drive failure possible." (or
"Time of drive exceeded.") and disconnection of a drive due to RAID error
(OFFLINE) happen at the same time, the description of the icon does not show "Drive
failure possible." (or "Time of drive exceeded.").
Nos. 15 and 16: If a hardware status error is detected at the same time, the icon for a hardware status error
is displayed.
in the lower-left corner of the Start screen to go to the Apps view.

Table 4-1 Hardware Status Icon

Icon
Hardware status is normal.
Fan failed.
Abnormal TEMP detected.
Fan failed. Abnormal TEMP detected.
Fan failed. Drive failure possible.
Abnormal TEMP detected. Drive failure possible.
Fan failed. Abnormal TEMP detected. Drive failure possible.
Fan failed. Time of drive exceeded.
Abnormal TEMP detected. Time of drive exceeded.
Fan failed. Abnormal TEMP detected. Time of drive exceeded.
RAID error detected.
Fan failed. RAID error detected.
Abnormal temperature detected. RAID error detected.
Fan failed. Abnormal temperature detected. RAID error detected.
Drive failure possible.
Time of drive exceeded.
same time, the description of the icon does not show "Time of drive exceeded."
Description of the icon
4-4