Figure 4-12 Application Status Code; Figure 4-13 Stop Error Code - Hitachi HF-W7500 40 Manual

4. CHECKING THE HARDWARE STATUS
(2) Application status codes
An application status code is displayed by a user application by using library functions
provided by this function.
When an application status code is displayed, the center LED in the status indication
LEDs is lit.
(3) STOP error codes
The STOP error code "80" is displayed when a STOP error (blue screen) has occurred
during system operation for some reason. Regardless of the status display mode, "80"
is displayed with higher priority than the timeout code. For information about the
status display modes, see "4.4.3 Status display modes".
When the STOP error code is displayed, all LEDs in the status indication LEDs are lit.
For information about the priority of displaying each code, see "4.4.4 Priorities of
displayed codes".
On

Figure 4-12 Application Status Code

"80" is displayed
( )
On

Figure 4-13 STOP Error Code

4-18