Table 3-3 Items Displayed In The Object List For Each Option Selected In The Event List - Hitachi HF-W7500 40 Manual

(2) Checking popup notification messages
You can check the change you made in the message for each of the following items:
• Fan failure
• Abnormally high temp.
• Drive failure prediction
• Drive usage excess (When the drive power-on (=used) hours exceeds the threshold)
• RAID error is detected. (D Model only)
• Error correcting in memory (When memory correction is detected frequently)
The following shows how to check the change you made in the message.
1. In the Event list, select the event you want to check.
In this list, only the items under Events selected using the check boxes are
displayed. If no items under Events are selected using the check boxes, you cannot
select an item from the Event list.
2. In the Object list, select the object you want to check.
Items in this list depend on the item you selected in step 1.
The table below shows items displayed in the Object list for each option you select in
the Event list.

Table 3-3 Items Displayed in the Object List for Each Option Selected in the Event List

Option in the Event list
Fan failure
Abnormally high temp.
Drive failure prediction
Drive usage excess
RAID error is detected.
Error correcting in memory
<Example of Selecting Fan failure>
<Example of selecting PS (power) fan>
PS fan, Front fan, CPU fan
Temperature inside the chassis
Drive bay1, Drive bay2, Drive bay3
Drive bay1, Drive bay2
DIMM A1, DIMM A2, DIMM B1, DIMM B2
3-17
3. SETTING UP THE RAS FEATURE
Items in the Object list