Hitachi HF-W7500 40 Manual page 156

<D Model>
The following shows the list of items on the menu when you right-click Drive bay1 or
Drive bay2.
When you right-click Drive bay3, the list of items on the menu is the same as the one
shown in <Other than D Model>.
No. Current status
1 Healthy
2 SMART Detected SMART Detected, Not Connected,
3 Overrun
4 Not Connected
5 Offline
6 Rebuild
(*1) If the RAID status is "Degrade", "Offline" and "Not Connected" are not
displayed.
(*2) If the RAID status is "Degrade", "None" is the only item on the menu and is
grayed out.
(*3) Transition of the status from "Rebuild" to "Healthy" means the rebuild process
is complete.
(*4) We suppose transition from "Rebuild" means a new drive is connected.
Consequently, transition to "SMART Detected" or "Overrun" is not allowed.
● Memory
No. Current status
1 Normal
2 Error
3 Not Mounted
(*) In the case of this equipment, the equipment never starts with the DIMM A2 not
being mounted, and consequently, "Not Mounted" is not displayed for the
DIMM A2 on the popup menu.
Statuses in the popup menu
Healthy, SMART Detected,
Overrun, Not Connected, Offline
Offline
Overrun, Not Connected, Offline
Not Connected, Rebuild
Not Connected, Offline, Rebuild
Healthy, Not Connected, Offline,
Rebuild
Statuses in the popup menu
Normal, Error, Not Mounted
8-11
8. SIMULATING THE HARDWARE STATUS
Note
(*1)
(*2)
(*2)
(*3) (*4)
Note
(*)
(*)
(*)