Using The Ras Setup Window; Figure 3-2 Items In The Shutdown Setting - Hitachi HF-W7500 40 Manual

3.1.3 Using the RAS Setup window

(1) Shutdown setting
You can select whether this equipment is automatically shut down for each of the
following cases: a fan failure, an abnormally high temperature, and a remote shutdown
request.
● "Automatically shutdown if fan failure has been detected" check box
• Selected: This equipment will be automatically shutdown (default factory-shipped
• Cleared: This equipment will not be automatically shutdown.
● "Automatically shutdown if abnormally high temp. has been detected" check box
• Selected: This equipment will be automatically shutdown.
• Cleared: This equipment will not be automatically shutdown (default factory-
● "Automatically shutdown if remote shutdown is requested" check box
• Selected: This equipment will be automatically shutdown (default factory-shipped
• Cleared: This equipment will not be automatically shutdown.
If you change the current setting, click the check box you want to change.

Figure 3-2 Items in the Shutdown Setting

setting).
shipped setting).
setting).
3. SETTING UP THE RAS FEATURE
3-3