H122D Frequently Asked Questions - Hubsan H122D X4 STORM User Manual

Table of Contents

Advertisement

H12 2D Fre quent ly A sk ed Qu e s t i on s
1. Aircraft and remote control are not pairing
(1) Check that the aircraft and remote control are both powered on.
(2) Turn off both the aircraft and remote control. Rebind the aircraft to the remote control
by following the rebind directions on page 7 of this guide.
2. No video on the screen or user is experiencing strong video feed interference
(1) Check whether there are strong sources of wireless interference (i.e. WIFI, electricity,
radio tower frequencies, etc). If there are any, please change your flight location.
(2) Rebind the copter to the transmitter, as the 5.8 and 2.4 frequencies might be
interfering with each other.
(3) Browse through the selection of available 5.8gHz frequencies to find a clean channel.
3. Aircraft/video feed is shaking/shaky
(1) Check if the aircraft propellers are deformed or broken. Please replace them.
(2) Check that all aircraft body screws are firmly in place.
(3) Check whether any motor shafts are broken. Motors must be replaced if the shafts are
broken.
4. Cannot take videos or pictures
(1) Check to see that the SD card is installed in the aircraft prior to power on.
(2) Make sure the SD card is Class 10 or higher, contains 16GB or 32GB of storage and
is formatted to FAT32.
21

Advertisement

Table of Contents
loading

Table of Contents